How To Find Your IP Address | Find your public or private IP address (plus your router's IP)


A TCP / IP computer network uses two types of IP addresses - public (also called external) and private (sometimes called internal or local).


If you are setting up a file server or website, you may need a public IP address, while communicating with a private IP address with local devices, forwarding ports to the router or accessing your router for network changes. Useful for.

No matter what you need an IP address, below are the steps needed to find your IP address.

How to find out your public, Internet IP address
The public IP address is addressed above. That is, this is the "face" of the network. This is an IP address that you use to interact with the Internet to access all your local network device websites.

On the home network, the public IP address can be found on the router because it is the one that needs to be stored in the router so that it can be used to find out how to communicate with devices outside the local network. There is more to it under

However, instead of digging your router, there are easy ways to find your public IP address. Below are some websites that can identify your public IP address. Open the same on your computer or phone, in which the Internet address is displayed:

  • WhatIsMyIPAddress.com
  • Ip chicken
  • WhatIsMyIP.com
  • Ip look


If you are running a VPN, then the IP address shown on the IP finder website will show the address that is using VPN, not the true address that ISP has assigned to your network.

Since this information is public, to a lesser extent, you can sometimes find an IP address owner by searching for their address on IP lookup website.

How to put your personal IP address on a computer

Private IP address is the address that should be with each device on the local network if they want to communicate with the router and other devices. It facilitates communication between all local devices and ultimately allows everyone to access the internet.

If more than one device is using the same IP address on a local network, then the IP address conflict is triggered.

How to find local IP in Windows


On all modern versions of Windows, running a ipconfig utility from a command prompt displays a list of addresses assigned to the PC.

If connected to local network via Wi-Fi, then the active IP address "Wireless LAN Adapter Wireless Network Connection" will be shown under the section of ipconfig output. If an Ethernet cable is connected through it, the address will be shown under "Ethernet Adapter Local Area Connection". If both networks are connected together, both IP addresses will be shown.


Windows users can optionally obtain their personal IP address using the control panel. From the control panel, open the Network and Sharing Center. On that screen, change the adapter settings on the left side of the screen and then find the wired or wireless connection that appears in the new window.

From there, double-click on the connection to open its properties. Click on the details to see all network settings of the connection, including the private IP address.

Winipcfg utility was used only to identify IP addresses on older versions of Windows (Win95 / 98 and Windows ME).

How to find local IP in MacOS


  1. On Apple Mac devices, local IP addresses can be found in two ways.
  2. The first is with System Preferences. Open the network pane to see the IP address listed under "Status".
  3. The second way is a bit more complicated. Open Terminal Utility and run the ifconfig command. The IP address (with other local network configuration details) is listed next to the name "inet".
  4. There is something listed with the IP address that is called the loopback address. You can ignore that entry.


How to Find Local IPs in Linux


Linux IP addresses can be found by running the ifconfig utility. The IP address is listed next to the name "eth0".

How to put your personal IP address on the phone

This process varies depending on the phone or tablet you are using. For example, to find the IP address on most versions of iPhone:

  1. Open the Settings app.
  2. Tap on the Wi-Fi menu.
  3. Next, tap on the network (connected to the checkmark), small (i) connected to the network.
  4. The local, private IP address of the phone is shown next to "IP Address". This ip address is generally, 192.168.100.1 or 192.168.1.254 etc.

Apart from this, the router has an IP address, which is connected to the phone. That IP address is not the public IP address of the entire network, but instead, the local address that is configured to use the router, also known as a default gateway.

Although these steps are for iPhones, you can usually follow the same path on other mobile devices by searching for options or menus in the menu related to the Settings app or any other network.

Comments

Post a Comment

Popular posts from this blog

Here to login into Netgear AC1900 c6300bd Router?

The Netgear router model AC1900 is a4 port gigabit router that includes dual-band wireless access point into one device. You can get speeds around 600+1300 Mbps. Netgear Modem AC1900 C6300BD simplifies the DOCSIS 3.0 standards that let this modem download speeds 16x faster that makes it amazing to flow HD videos and High-Speed online gambling. The complete Netgear functions like a package of DOCSIS 3.0 cables modem and also the AC1900 wi fi router along side 4 gigabit wired switch. This Netgear model works excellent using Xfinity Comcast, Spectrum and CableONE smoothly. You can also manage the settings to make it suitable for the network. In this informative article, we'll help you with logging into to Netgear AC1900 modem. Prerequisites To access the default login gateway of Netgear AC1900 C6300DB: An Computer connected for the Netgear Wi Fi Box of Netgear Modem to get the default credentials Steps to Login into Netgear AC1900 c6300bd Router Step 1: Open the Internet b
Read more

The Way You Can Find the Default IP Address of a Belkin Router

Home broadband routers are assigned two IP addresses. One is for connecting to outside networks such as the internet, and one other one is for communication with devices located inside the network. Internet providers furnish a people ip address address for your own outside connection. The router manufacturer sets a default private ip address address utilized for local networking, and also your home network administrator controls it. The default IP address of most Belkin routers is 192.168.2.1. Belkin Router Default IP Address Settings Every router comprises a default IP address if it's fabricated. The specific value is contingent upon the brand and model of router. The administrator must know the address to connect with this router's console by means of a browser to do things like change the password, set up port forwarding, enable or disable Dynamic Host Configuration Protocol (DHCP), or even set custom Domain Name System (DNS) servers. Any device that's conn
Read more